Back at it!

I am replacing the frame rails directly under the driver and passengers since the originals were all beat up. I want the underbody to look as good as the top when I am done.

Here is the list of tools that I put together to remove the Drivers side underbody frame extention.



1. Drill with a spot weld remover bit.



2. Grinder with a cut-off wheel



3. Screwdriver / prybar



4. Small Sledgehammer



5. Patience!


As you can see, the amount of factory spotwelds make the front section look like swiss cheese. Also, I thought I had them all until it would not come out. There is 4 hidden spotwelds in a place you cannot get to unless you bend the outside sheet metal down. sheesh!